GlobalEx

Cleantab

Drinking Water Disinfection

Product Informations

  • Iron and manganese oxidation
  • Bacteria control
  • Virus control
  • Algae control
  • Phenols control
  • Ph range from 3.5 to 11
  • Operational between -120ºc. and +80ºc.
  • Trihalomathane (THMs) control
  • Haloatcetic Acids (HAAs) control
  • Cryptosporidium Inactivation
  • Nitrification control
  • Zebra Mussel Control

Cleantab is often used in combination with chlorine in municipal drinking water plants in order to reduce the amount of trihalomethanes and HAAs that would be formed if chlorine were used alone. Chlorine dioxide is added as the primary disinfectant in order to remove a number of oxidisable compounds without forming chlorinated DBPs, while chlorine is added at low levels in order provide a residual biocide for use in the disinfection system.

These odor causing compounds have been identified as geosmin, 2-methylosobomeol (MIB), pyrazine chlorophenols, actinomycetes, sulfur species or other odorous by-products of microscopic organism. Cleantab is effective low-threshold-odor compounds like geosmin and MIB at typical Cleantab have an advantage in that its use for controlling tastes and odors will not chlorinate organics.

How to use it?

1
Put the tablets
in the water
2
Wait for
30 minutes
3
The water is ready
for consumption

Cleantab, when used as an oxidant for iron and manganese reduction in potable water treatment, is a powerful oxidant with CT values second only to ozone in biocide efficacy, but without the high capital expenditures and the ozone byproducts. Cleantab, when used as an oxidant for iron and manganese reduction in potable water treatment, is a powerful oxidant with CT values second only to ozone in biocide efficacy, but without the high capital expenditures and the ozone byproducts.

Cleantab produces chlorine dioxide. The use of chlorine dioxide is approved by U.S. EPA’s office for ground water and drinking water. Chlorine Dioxide is defined in the USA as having " no elemental free chlorine " hence it does not chlorinate. It is because of this fact and the amazing chemistry of chlorine dioxide that it is slowly becoming an important tool in disinfection and oxidation in the world today.

Cleantab works at lower dosage for the same efficacy against bacteria and fungi when compared against any other standard disinfectant like chlorine, iodine, bromine, hydrogen peroxide, quaternary ammonium compounds (QUATS), glutraladehyde, phenolics and peroxyacetic acid formulations.

Product Lines

Cleantab 0.1 g 0.0035oz 0.8g 0.028oz 1g 0.035oz 20g 0.70oz
20 pills box
40 pills box
20 tablets bag
40 tablets bag
500 tablets bag Only Russia
25 kg barrel
Available
Not available

You might also like...